| We
do not use sub contract labour, all our team all fully trained flooring
specialists working for our company full time all our team have there
names on the company uniform
  The
latest
Humel Sanding Machines
If you have seen
the rest you know we have the best, why settle for anything less
Please phone Junckers Ltd on
01376534710 to see if the contractor you are about to
use is on the the Junckers approved list of trained
installers, if not you will not get any warrenty from Junckers
on your new floor as the comany your are about to use are not Junckers
trained Installers why take chances
C..M.T. flooring
Ltd will repair and restore your existing floor to its former glory.
we do not use old drum sanding machines,
we use
the top of the range Humel Belt sanding machines, keeping mess
to a minimum (around 99% dust extraction/pick up) using Bonakemi
DCS dust extra units, we are the only company in the Midlands to have
this system we can make your floors look as good as new, using the highest
quality environmentally friendly waterborne lacquers. Bonakemi or Junckers
lacquers We are a firm commitment to deliver Quality, Excellence of
Service and Customer Satisfaction and have acquired an impressive portfolio
of blue chip companies. Over the last eleven years.
we are Junckers and Bonakemi approved wood floor contractors, please
phone or email if you require sample sent to you, We sand the floor
to a finn finish with 40 80 & 120 grit Zirconium
sand paper, clean the floor, apply one coat of Bonakemi Prime and one
coat of Mega or Traffic wood floor seal, cut the floor back with Bonakemi
Scrad system, clean the floor again and apply an extra coat of Bonakemi
wood floor seal, with all block floors we sand the floor Diagonally
to help remove the sanding lines, then we use a specials Trio machine
to remove any sanding lines we may have mist, then clean the floor and
apply the seal,
if you require a sprung floor just click on www.sportsflooring.biz to
see the what type of under carriages are available for sports floors,
the most sutable timbers for sports hall are Junckers 129mm wide by
22mm thick solid Beech Oak & Maple
A visit can be arranged
to suit you and a free written quotation
We do not use
sub contract labour, all our team all fully trained flooring specialists
The sanding and sealing of Hardwood floors,
Oak, Beech Maple, Cherry Walnut or any softwood floors is not as simple
as it looks unless you have experience using the new modern sanding
machines it very easy to damage the floor by leaving sanding dig marks
and other sanding lines in the floor if you do not know what you are
doing.
Sanding and sealing of all wooden floors
The preparation is always the key to every success and with sanding
floors. You must make sure that the room is empty before you start sanding
and sealing. If this is not possible you can always ask a member of
our team to help. The new modern sanding machine bags are fire proof,
so it is not possible to catch fire not like the old sanding machines,
and have 99% dust extraction
If the wood flooring is in pretty good condition you will be able to
get started sanding quite quickly but if any of the flooring is in need
of repairs, you will have do this done before you can start any sanding
work. If the floor is cupped or warped this will require additional
sanding with our new Trio sander as our Hummel
sanding machines won't reach the low spots in the board surface
properly. If any of the floor boards need to be replaced we keep a good
stock of reclaimed timber. The idea of using stain on the new boards
to match the colour of the older boards is a good idea if you have plenty
of time and don't mind making mistakes. When applying stain it is better
to put stain on with one soft cloth and wipe off with a dry cloth to
get an even finish it is always better to stain the complete floor to
give it a more even colour, before applying any Bonakemi
or Junckers floor seal
You can fill any gapes in your floor with Bonakemi
Mix n Fill wood filler just mix the mix n fill with your clean
saw dust to make a good past and the fill the gapes. When the filler
is dry, you will need to re-sand the filler and clean the floor before
any Bonakemi or Junckers seal is applied
Sanding and sealing of all wood floors
With the modern sanding machines sanding and sealing of your hardwood
or softwood flooring need not be a dusty any dirty operation any more.
The best way to making it virtually dust free is to use the Hummel sanding
machines with Bonakemi DCS dust extra units.
Most hire shops will only supply with old drum sanding machines and
cheap sand paper with very poor dust extraction leveling you to clean
up all the messes if you can try to hire a professional Belt sanding
machine. It is possible for you to hire professional Belt sanding machine
and edging machine you have a good chance of door a great job
Another feature of the Hummel sanding machine is the belt pressure adjustment
you can change the adjustment to what grade of sand paper you are using
at the time, this will help you get a much better finish
Sanding and sealing
Start sanding your floor using a 36 grit paper to remove the dirt that
has built up over time on the floorboards. always sand up and down the
grain most times will only need to start with a 40 grit paper then 80
grit and 100 grit paper when the floor is clean you can then start with
the edging sander and a small orbital sander the more time you spend
of the preparation the better the floor finish will be, if you can hire
a Trio sand machine to do the final finish before any seal goes on you
floor
Sanding and sealing of all wood floors
Now you have finished the sanding of the floor you are ready to apply
the Bonakemi or Junckers floor, give the floor a final clean, and you
are ready to apply your Bonakemi or Junckers floor seal, not do be tempted
to use a cheap floor seal. It will not last and you Know Howe hard you
have worked it would be a sham to spoil it at this stage, if you do
decide to stain your floor always use a Bonakemi or Junckers primer
first this will stop any cracking in your floor, and help the final
coats of seal to bond to your floor
Sanding and Sealing of all wood floors
All Bonakemi and Junckers wood floor seal
have full instruction on the Bottles it is always best to read them
first and give the seal a good shake before you start
A good quality six inch paint brush is good for cutting the edges just
take your time and do a good job
You will not be able to apply too much sealer when using a water based
seal so you need to pay attention on getting a good coverage without
missing any parts of your floor
After you have applied the first coat of seal you may get grain raze
in the wood this is normal after the have applied the [primer and the
fist coat of seal You will now need to cut the floor back with
Bonakemi Scrad system, and then clean the floor with a vacuum
cleaner after every sanding
The process is repeated between the second and third coat as well. We
use either Bonakemi or Junckers floor Seal
we do recommend using a water base seal which does not leave any solvent
smells in your home or work place
www.schoolfloorcontractors.com
www.woodfloorpolish.com.com
www.hardwoodfloorcleaner.co.uk
www.bonakemi.uk.com
www.cmtflooring.co.uk
www.allwoodenfloor-restoration.com
www.floorboardsanding.co.uk
www.sportsfloorsanding.com
www.woodfloorsanding.biz
www.sportsfloors.biz
www.junckerslacquer.com
www.hardwoodflooring.me.uk
|
